====== SFTP receive channel ====== The SFTP receive channel allows the connection of a directory via SFTP protocol. Messages from the directory stored in the channel are placed in the message basket (incoming). ===== Immediate retries ===== In case of error code * 1103 - Read remote file failed [4]: capacity < 0: (-257 < 0) * 32000 - Connection closed unexpectedly and a "Retries on error" > 0, the error is written to the log and the download is retried after one second. A task is created if the error still occurs on the last attempt. ^GENERATED src="eBiss.Data.Resources.sFtpReceiveChannel" changed=""^^ ^Properties^^ ^Name^Description^ |**Name**|The name of the channel| |**Channel type name**|The Type of the channel| |**Message direction**|For receive channels the direction of the received message (but require also for send channels)| |**Message box**|The message box| |**Public**|True if the channel should be visible in the sub node| |**Host**|IP address of the email server e. g. //175.11.214.25//.| |**Port**|Port (preferably 22).| |**Username**|Login to SFTP server| |**Password**|The password for logging in to the SFTP server| |**Path**|The directory from which the files are to be read.| |**File mask**|The file mask, which may contain the placeholders * and ?| |**Advanced file mask**|After the 'File mask' application and the file names read with it, the 'Extended File Mask' is applied. Regular expressions can be used here, see [[en:prozessdefinition:repositorien:erkennungskomponenten:regex|]].| |**Fetch sub directory levels**|If the value is greater than zero, then the files in the subdirectories are also read. The value specifies up to which level the subdirectories are read.| |**Identify partner by sub directory**|The relative path is used and with this a sftp address of a partner is searched and if found, then this partner is assigned to the message.| |**Action after receive file**|Specifies whether the files should be: Deleted, Moved, Move with time stamp| |**Move to path**|The fetched files are moved to the path| |**Rename file**|An optional parameter to rename the file name after retrieval. Is only evaluated if 'Action after receive file' is set to 'Move' or 'Move with timestamp'. You can use ${fn} and ${extension}. Renaming the file from e.g. 'info.csv' to 'info.sic' is achieved with the value: ${fn}.sic| |**Change logs**|The changes to the element are logged. The logging is activated in the [[en:hauptmenue:einstellungen:systemeinstellungen]], which is possible if a versioning license is available.| ^Properties (advanced)^^ ^Name^Description^ |**Sender validation**|How the sender address should be validated| |**Default sender**|The default sender| |**Recipient validation**|How the recipient address should be validated| |**Default recipient**|The default recipient| |**Immediate retries**|Retries, used by send channels. For some receive channels, the number of pickup attempts.| |**Auto uncompress**|Check if receipt data are compressed and then uncompress them| |**Transfer mode**|Setting the transmission mode. Mode //(Auto, Text, Binary)// can be selected in the corresponding look main table.| |**Protocol version**|The default value -1 at this point means that the current default value for SFTP is used, which is currently version 3. We had a case where version 4 was necessary to achieve the desired replacement of CR to CRLF in connection with the text mode.| |**Sort order of read files**|Sequence in which the received data are read and processed.| |**Authentication certificate**|The private certificate((PFX file (PKCS #12, .pfx, .p12) and Open SSH certificates (.ppk) are recognized. Putty certificates cannot be read, they should be exported as Open SSH certificate. If the certificate is not recognized please report to Pranke Support or read in using the following format: 'PEMKeyFile|', possible formats are: P7BFile, P7BBlob, SSHPublicKeyFile, PPKFile, PPKBlob, JKSFile, JKSBlob, PEMKeyFile, PEMKeyBlob, PublicKeyFile, PublicKeyBlob, SSHPublicKeyBlob)) of the client, if the authentication with the server should be done via the certificate.| |**Auth. certificate password**|Password of the certificate specified in "Certificate for Authentication".| |**Auth. certificate subject**| |**Certificate info**|If a certificate has been stored and recognized, the FingerPrint, the serial number and the expiration date are displayed here.| |**SSH encryption algorithms**|Encryption algorithms supported by this component for the encryption of the ssh session. Values can be entered as a comma separated list, using the following values: 'aes256-ctr, aes256-cbc, aes192-ctr, aes192-cbc, aes128-ctr, aes128-cbc, 3des-ctr, 3des-cbc, cast128-cbc, blowfish-cbc, arcfour, arcfour128, arcfour256, aes256-gcm@openssh.com, aes128-gcm@openssh.com'. By default this component supports 'aes256-cbc' and '3des-cbc'.| |**SSH MAC algorithms**|MAC algorithms supported by this component for the ssh session. Values can be entered as a comma separated list, using the following values: 'hmac-sha1, hmac-md5, hmac-sha1-96, hmac-md5-96, hmac-sha2-256, hmac-sha2-256-96, hmac-sha2-512, hmac-sha2-512-96, hmac-ripemd160, hmac-ripemd160-96'. By default this component supports 'sha1', 'sha1-96', 'md5' and 'md5-96'.| |**Additional SSH parameters**|This value is passed directly to the SSH component and should never be set. A case we know of is 'The server key seems to be invalid when using the 'diffie-hellman-group-exchange' key exchange algorithms' solved with the value: SSHKeyExchangeAlgorithms=ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521|