Inhaltsverzeichnis

Extended Properties

In the Advanced Properties you will find the following five tabs with different contents:

  1. Element properties of three possible mapping elements:

Extended mapping properties

Name meaning
Prolonged ReleaseYes / No
Maximum Report LevelFIXME The documentation to be expected here will be maintained in a future version.1)
Generate task at'Warning'Yes2) / No

Element properties

These depend on the property of the selected mapping element.

element properties of mapping rule sets

Name meaning
Name Name of the ruleset.
sourceXPath to the source or a condition3) which should apply.
TargetXPath to the target element4) or empty.
DisabledYes / No5)
Mandatory fieldYes / No6)
Control behaviorAutoSelect / WhileLoop
Max. Number of passes100007)
User-defined error messageExtra error message 8).
Validate generated objectsYes / No9)

A freely definable description10) about the ruleset. |

Element properties of mapping rules

Name meaning
NameName of the rule.
SourceXPath to the source or an expression.11)
TargetXPath to the target element12) or empty.
DisabledYes / No13)
Mandatory fieldYes / No14)
User-defined error messageExtra error message 15)
Selection modeAdditional values and conditions can be specified here. If the first value, the first condition of the rule (under the target field) does not apply, the next value, the next condition in the selector under the rule is evaluated.
DescriptionA freely definable description16) about the ruleset.

Element properties of mapping selectors

Name meaning
SourceXPath to the source or an expression.17)
DescriptionA freely definable description18) via the selector.

Source frame variables

This view is filled as soon as you instantiate a source object using message debugging.

Note: See list of [transformation:mappings:framevariables]].

Target frame variables

This view is filled as soon as you successfully apply the mapping to a source object and instantiate the target object.

Note: See list of [transformation:mappings:framevariables]].

Mapping variables

All instances of variables used in the mapping are displayed here as soon as the mapping is successfully applied.

Variable Value
Name of variable value of variable
1)
Default value = 2
2)
Also generates a task for warnings.
3)
If the rule is always to be executed, it is sufficient to specify a point '.' as source.
4)
For rule sets this is usually an array.
5)
Disables or enables the rule set.
6)
Makes the rule or the rule set mandatory.
7)
Maximum number of passes allowed, default value=10000
8)
Usually mapping variables are generated using the [ transformation:mappings:functions:string:concat|concat()]]) function as meaningful error messages.
9)
FIXME The documentation to be expected here will be maintained in a future version.
10) , 16) , 18)
For documentation etc.
11)
The source of an active rule must not be empty.
12)
This can also be a variable.
13)
Disables or enables the rule.
14)
Makes the rule or rule set mandatory and if this value, this condition must be set or does not exist during the mapping process, the condition is not fulfilled. As in the event of an error, a task is created and a log entry is generated and the current job is then terminated.
15)
Usually mapping variables are generated using the concat() function as meaningful error messages.
17)
The source of a selector must not be empty.