eBiss 3

Hilfe & Dokumentation

Benutzer-Werkzeuge

Webseiten-Werkzeuge


Action disabled: login
en:troubleshooting:errorcodetable



Error states (TaskState / TaskMessage / TaskMessageSeverity)

The following table shows a list of possible errors in eBiss and their description:

TaskMessageSeverity

ErrorCode Description
0Notification
1Warning
2Error
3Exception
4Fatal
99Unknow
C*Custom error codes, see AddError

TaskMessage

GENERATED src=„eBiss.Api.Resources.Enums.TaskMessage“ option=„EnumCodeAndId“ changed=„„
CodeIdNameDescription
0NoneNone
1000NotificationStartNotification start1)
1001AutoPartnerCreatedAuto partner createdA trading partner was created in the process
1002AutoLocationCreatedAuto location createdA location was created in the process
1003AutoLookupTableCreatedAuto lookup table createdA lookup table was created in the process
1004AutoAddressCreatedAuto address createdAn address was created in the process
1011NewLookupValuesAddedNew lookup values addedLookup values were created in the process
1012NewCounterInstanceAddedNew counter instance added2)
1100ReceivedNewMessagesReceived new messages3)
1499NotificationEndNotification end4)
1500WarningStartWarning start5)
1501ResultingDocumentErrorWarningResulting document error warningIn the mapping, errors occurred in the document to be created
1510ChannelWarningOccuredChannel warning occured6)
1999WarningEndWarning end7)
2000ErrorStartError start8)
2001CannotFindPartnerCannot find partnerThe partner was not found, e.g. at the receiving channel, in the analyzer
2002CannotFindLocationCannot find locationThe location was not found, e.g. at the receiving channel, in the analyzer
2003RequestedLookupValueMissingRequested lookup value missing9)
2004CannotFindAddressCannot find addressWhen sending a message in the send channel (ChannelSender) the receive or sender address cannot be determined
2005CannotIdentifyPartnerOrLocationCannot identify partner or locationE.g. at the receive or transmit channel the partner is needed but is not set at the message
2006CannotLoadDocumentCannot load documentE.g. in ExcelImporter
2007CannotPositionOnDocumentCannot position on document10)
2008CannotFindChannelCannot find channelWhen sending the message, the sending channel was not found
2009DuplicateDocumentDuplicate documentIs thrown by the DuplicateDocumentBlocker job step
2010CannotChangePartnerThe partner could not be changedError from EntityAnalyzer
2050GenericReaderExceptionError loading the documentMay occur in the EntityLoader
2101MissingJobDefinitionMissing job definitionThe job was not found in the workflow, e.g. at the DelegatorJob-Step
2201TransformationExceptionTransformation exceptionVarious errors in mapping
2301CannotFindTypeCannot find type11)
2401UnableToSendUnable to sendError during sending, e.g. in the Job-Step ChannelSender, MessageNotificator
2402GenericChannelExceptionGeneric channel exceptionVarious errors in the receive or transmit channel
2403ChannelErrorOccuredChannel error occured12)
2404ChannelAuthentificationFailedChannel authentication failed13)
2405ChannelMessageNotSentChannel message not sentError in X.400 Sendekanal
2406ChannelSendErrorChannel send errorError in X.400 Sendekanal
2407ChannelReceivingDoubletReceiving doublet (ComRef available)Is determined by the ChannelReceiver
2411CannotFindNotificationAddressCannot find notification addressError from MessageNotificator
2412NotifiedMessageDoesNotExistNotified message does not existeBiss has received a message, e.g. MDN or DSN, for which the original message was not found
2413NotifiedMessageWasCommitedNotified message was commited14)
2500ExecutionFailedExecution failedGeneral eBiss internal execution errors, e.g. during archiving, during deletion (Remove Job-Steps)
2801EanQueryIncompleteEan query incompleteUsed in Retail and Supplier Article Pool
2802CannotExtractEansCannot extract eansUsed in retail and supplier articles pool
2901ExternalProgramFailedExternal program failedErrors in Job-Steps ExecuteExternal and ExecuteExternalProcessor
2951CustomError1Custom error 1For use in customer PlugIns
2952CustomError2Custom error 2For use in customer PlugIns
2953CustomError3Custom error 3For use in customer PlugIns
2954CustomError4Custom error 4For use in customer PlugIns
2955CustomError5Custom error 5For use in customer PlugIns
2956CustomError6Custom error 6For use in customer PlugIns
2957CustomError7Custom error 7For use in customer PlugIns
2958CustomError8Custom error 8For use in customer PlugIns
2959CustomError9Custom error 9For use in customer PlugIns
2960ValidateEncodingErrorFile encoding could not be determinedError message from Job-Step EncodingValidator
2999ErrorEndError end15)
3000ExceptionStartException start16)
3001UnableToAnalyseContentUnable to analyse contentError message from job step EntityAnalyzer
3002FailureInBackendObjectTransmitterFailure in backend object transmitterError when sending documents via the backend
3003ChannelExceptionOccuredChannel exception occuredAn unspecific error has occurred during communication, e.g. on the receive channel
3004RetailTradeItemManagerRetail trade item managerGeneral error message in retail job step TradeItemManager
3998GenericExceptionGeneric exceptionAn unspecific error has occurred, e.g. in the job steps: EntitySelector, JobExecuter, RemoveMessages
3999ExceptionEndException end17)
9000FatalStartFatal start18)
9001ChannelFatalChannel fatal19)
9100EventManagerFatalFatal error in EventManangereBite internal error
9200DbConnectionFatalFatal DB connection erroreBite internal error
9900DbIsDamagedSerious DB errorCan only occur at system startup, if at all
9999FatalEndFatal end20)

Custom Error Codes

ErrorCode Description
C*All error codes starting with a C are custom errors
1) , 4) , 5) , 7) , 8) , 15) , 16) , 17) , 18) , 20)
The start and end values are not assigned as errors but are used for message selection in the job steps
2) , 3) , 6) , 9) , 10) , 11) , 12) , 13) , 14) , 19)
not used by eBiss
en/troubleshooting/errorcodetable.txt · Zuletzt geändert: 2024/02/20 08:15 von 127.0.0.1